Dormer A5538.5 5971428 130° ADX Drill Oil Feed 8.50 mm
- Write a review
$117.44
ApplicationAngleIcon_DICT_SELDrill point 130°Basic StandardDORMERCoatingTiAlN/TopCoating processPVDCoating property (CTP)1Connection (shank) descriptionCylindrical shank DIN 6535 HAConnection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Connection diameter tolerance machine side (TCDCONMS)h6Coolant supply property (CSP)1Cutting diameter - inch (DC)0.3346Cutting diameter - millimeter (DC)8.5Cutting diameter tolerance class (TCDC)h8Drill LengthJobberEDP number391419Hand (Cutting direction)RightLength chip flute - inch (LCF)2.9528Length chip flute - millimeter (LCF)75MaterialHSS-EMID number5971428Ordering code ANSIA5538.5Overall length - inch (OAL)5.1181Overall length - millimeter (OAL)130Point Angle (SIG)130Shank length - millimeter (LS)40Spiral formQuick SpiralUsable length (ULDR)5
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 130° |
| Basic Standard | DORMER |
| Coating | TiAlN/Top |
| Coating process | PVD |
| Coating property (CTP) | 1 |
| Connection (shank) description | Cylindrical shank DIN 6535 HA |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.3346 |
| Cutting diameter - millimeter (DC) | 8.5 |
| Cutting diameter tolerance class (TCDC) | h8 |
| Drill Length | Jobber |
| EDP number | 391419 |
| Hand (Cutting direction) | Right |
| Length chip flute - inch (LCF) | 2.9528 |
| Length chip flute - millimeter (LCF) | 75 |
| Material | HSS-E |
| MID number | 5971428 |
| Ordering code ANSI | A5538.5 |
| Overall length - inch (OAL) | 5.1181 |
| Overall length - millimeter (OAL) | 130 |
| Point Angle (SIG) | 130 |
| Shank length - millimeter (LS) | 40 |
| Spiral form | Quick Spiral |
| Usable length (ULDR) | 5 |
5971428
