Dormer E011M10X1.25 5974400 Machine Tap Spiral Point 3FL M10 x 1.25 mm
- Write a review
$39.07
Basic StandardISO 529Clamping Length - millimeter (LSC)11Clamping width - fractional inch (WSC)8Clamping width - inch0.315CoatingSteam TemperedConnection diameter - inch (DCON MS)10EDP number568453Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5974400Ordering code ANSIE011M10X1.25Overall length - inch (OAL)3.1496Overall length - millimeter (OAL)80Premachined hole diameter - inch (PHD)0.3465Premachined hole diameter - millimeter (PHD)8.8ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter size (TDZ)10Thread form (THFT)MF - Metric fineThread pitch - inch (TP)0.0492Thread pitch - millimeter (TP)1.25Threading length - inch (THL)0.7087Threading length - millimeter (THL)18Tolerance limitD6Usable length (ULDR)2.5Usable Length - inch (LU)1.3386Usable Length - millimeter (LU)34
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 11 |
| Clamping width - fractional inch (WSC) | 8 |
| Clamping width - inch | 0.315 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 10 |
| EDP number | 568453 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5974400 |
| Ordering code ANSI | E011M10X1.25 |
| Overall length - inch (OAL) | 3.1496 |
| Overall length - millimeter (OAL) | 80 |
| Premachined hole diameter - inch (PHD) | 0.3465 |
| Premachined hole diameter - millimeter (PHD) | 8.8 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter size (TDZ) | 10 |
| Thread form (THFT) | MF - Metric fine |
| Thread pitch - inch (TP) | 0.0492 |
| Thread pitch - millimeter (TP) | 1.25 |
| Threading length - inch (THL) | 0.7087 |
| Threading length - millimeter (THL) | 18 |
| Tolerance limit | D6 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 1.3386 |
| Usable Length - millimeter (LU) | 34 |
5974400
