Dormer C29916.0 5984390 End Mill 16.00 mm
- Write a review
$79.26
Basic StandardDIN 844 KCoatingBrightConnection diameter - inch (DCON MS)0.6299Connection diameter - millimeter (DCON MS)16Cut lengthShortCutting diameter - inch (DC)0.6299Cutting diameter - millimeter (DC)16Cutting diameter tolerance class (TCDC)k10Depth of cut maximum - inch (APMX)1.2598Depth of cut maximum - millimeter (APMX)32EDP number64344Flute count (NOF)4Flute helix angle (FHA)45MaterialHSS-E-PMMID number5984390Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.6102Neck diameter - millimeter (DN)15.5Ordering code ANSIC29916.0Overall length - inch (OAL)3.622Overall length - millimeter (OAL)92Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)12ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)43.5
Specifications
| Basic Standard | DIN 844 K |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.6299 |
| Connection diameter - millimeter (DCON MS) | 16 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.6299 |
| Cutting diameter - millimeter (DC) | 16 |
| Cutting diameter tolerance class (TCDC) | k10 |
| Depth of cut maximum - inch (APMX) | 1.2598 |
| Depth of cut maximum - millimeter (APMX) | 32 |
| EDP number | 64344 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 45 |
| Material | HSS-E-PM |
| MID number | 5984390 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.6102 |
| Neck diameter - millimeter (DN) | 15.5 |
| Ordering code ANSI | C29916.0 |
| Overall length - inch (OAL) | 3.622 |
| Overall length - millimeter (OAL) | 92 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 43.5 |
5984390
