Dormer E624M10 7350537 Machine Tap Yellow Shark for Low Alloy Steels Spiral Flute 3FL M10 x 1.50 mm
- Write a review
$53.83
Basic StandardDIN/ANSIClamping Length - millimeter (LSC)11Clamping width - inch0.284CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.381Connection diameter - millimeter (DCON MS)9.68Coolant supply property (CSP)QEDP number7350537Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)40Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number7350537Ordering code ANSIE624M10Overall length - inch (OAL)3.937Overall length - millimeter (OAL)0.381Premachined hole diameter - imperial (PHD)QPremachined hole diameter - inch (PHD)0.3346Premachined hole diameter - millimeter (PHD)40ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)8.5Thread diameter size (TDZ)10Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0591Thread pitch - millimeter (TP)1.5Threading length - inch (THL)0.5906Threading length - millimeter (THL)15Tolerance limitD6Usable length (ULDR)2Usable Length - inch (LU)1.5354Usable Length - millimeter (LU)39
Specifications
| Basic Standard | DIN/ANSI |
| Clamping Length - millimeter (LSC) | 11 |
| Clamping width - inch | 0.284 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.381 |
| Connection diameter - millimeter (DCON MS) | 9.68 |
| Coolant supply property (CSP) | Q |
| EDP number | 7350537 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 40 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7350537 |
| Ordering code ANSI | E624M10 |
| Overall length - inch (OAL) | 3.937 |
| Overall length - millimeter (OAL) | 0.381 |
| Premachined hole diameter - imperial (PHD) | Q |
| Premachined hole diameter - inch (PHD) | 0.3346 |
| Premachined hole diameter - millimeter (PHD) | 40 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 8.5 |
| Thread diameter size (TDZ) | 10 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0591 |
| Thread pitch - millimeter (TP) | 1.5 |
| Threading length - inch (THL) | 0.5906 |
| Threading length - millimeter (THL) | 15 |
| Tolerance limit | D6 |
| Usable length (ULDR) | 2 |
| Usable Length - inch (LU) | 1.5354 |
| Usable Length - millimeter (LU) | 39 |
7350537