Dormer E102M20NO8 5974843 M Hand Tap Straight Flute DIN 352 4FL M20 x 2.50 mm
- Write a review
$284.61
Basic StandardDIN 352Clamping width - inch0.4724Clamping width - millimeter (WSC)16CoatingSteam TemperedCoating property (CTP)4Connection diameter - inch (DCON MS)0.6299Connection diameter - millimeter (DCON MS)95Coolant supply property (CSP)12EDP number80115Flute count (NOF)17.5Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSS-EMaterial applicationK - Cast iron, M - Stainless steel, P - Steel and cast steelMID number5974843Ordering code ANSIE102M20NO8Overall length - inch (OAL)3.7402Overall length - millimeter (OAL)95Premachined hole diameter - inch (PHD)0.689Premachined hole diameter - millimeter (PHD)17.5ShankCylindrical shank with SquareTap chamfer style (TCS)A 6 - 8 / B 3.5 - 5 / C 2 - 3Thread diameter size (TDZ)20Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0984Thread pitch - millimeter (TP)2.5Threading length - inch (THL)1.2598Threading length - millimeter (THL)32Usable length (ULDR)1.5
Specifications
| Basic Standard | DIN 352 |
| Clamping width - inch | 0.4724 |
| Clamping width - millimeter (WSC) | 16 |
| Coating | Steam Tempered |
| Coating property (CTP) | 4 |
| Connection diameter - inch (DCON MS) | 0.6299 |
| Connection diameter - millimeter (DCON MS) | 95 |
| Coolant supply property (CSP) | 12 |
| EDP number | 80115 |
| Flute count (NOF) | 17.5 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E |
| Material application | K - Cast iron, M - Stainless steel, P - Steel and cast steel |
| MID number | 5974843 |
| Ordering code ANSI | E102M20NO8 |
| Overall length - inch (OAL) | 3.7402 |
| Overall length - millimeter (OAL) | 95 |
| Premachined hole diameter - inch (PHD) | 0.689 |
| Premachined hole diameter - millimeter (PHD) | 17.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | A 6 - 8 / B 3.5 - 5 / C 2 - 3 |
| Thread diameter size (TDZ) | 20 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0984 |
| Thread pitch - millimeter (TP) | 2.5 |
| Threading length - inch (THL) | 1.2598 |
| Threading length - millimeter (THL) | 32 |
| Usable length (ULDR) | 1.5 |
5974843