Dormer E500M33NO3 5976875 Machine Tap Straight Flute 4FL M33 x 3.50 mm
- Write a review
$386.69
Basic StandardISO 529Clamping Length - millimeter (LSC)22Clamping width - fractional inch (WSC)18Clamping width - inch0.7087CoatingBrightConnection diameter - inch (DCON MS)0.8819Connection diameter - millimeter (DCON MS)22.4EDP number94525Flute count (NOF)4Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5976875Ordering code ANSIE500M33NO3Overall length - inch (OAL)5.9449Overall length - millimeter (OAL)151Premachined hole diameter - inch (PHD)1.1614Premachined hole diameter - millimeter (PHD)29.5ShankCylindrical shank with SquareThread diameter size (TDZ)33Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.1378Thread pitch - millimeter (TP)3.5Threading length - inch (THL)1.6142Threading length - millimeter (THL)41Usable length (ULDR)1.5
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 22 |
| Clamping width - fractional inch (WSC) | 18 |
| Clamping width - inch | 0.7087 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.8819 |
| Connection diameter - millimeter (DCON MS) | 22.4 |
| EDP number | 94525 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5976875 |
| Ordering code ANSI | E500M33NO3 |
| Overall length - inch (OAL) | 5.9449 |
| Overall length - millimeter (OAL) | 151 |
| Premachined hole diameter - inch (PHD) | 1.1614 |
| Premachined hole diameter - millimeter (PHD) | 29.5 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 33 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.1378 |
| Thread pitch - millimeter (TP) | 3.5 |
| Threading length - inch (THL) | 1.6142 |
| Threading length - millimeter (THL) | 41 |
| Usable length (ULDR) | 1.5 |
5976875
