Dormer S814HA25.0 5983582 End Mill N 6527 L 25.00 mm
- Write a review
$393.07
Basic StandardDIN 6527 LCoatingAlCrNCoating property (CTP)1Connection diameter - inch (DCON MS)0.9843Connection diameter - millimeter (DCON MS)25Corner chamfer width - millimeter (CHW)0.3Cut lengthShortCutting diameter - inch (DC)0.9843Cutting diameter - millimeter (DC)25Cutting diameter tolerance class (TCDC)h10Depth of cut maximum - inch (APMX)1.7717Depth of cut maximum - millimeter (APMX)45EDP number642603Flute count (NOF)4Flute helix angle (FHA)34MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number5983582Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS814HA25.0Overall length - inch (OAL)4.7638Overall length - millimeter (OAL)121Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)9ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DIN 6527 L |
| Coating | AlCrN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.9843 |
| Connection diameter - millimeter (DCON MS) | 25 |
| Corner chamfer width - millimeter (CHW) | 0.3 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.9843 |
| Cutting diameter - millimeter (DC) | 25 |
| Cutting diameter tolerance class (TCDC) | h10 |
| Depth of cut maximum - inch (APMX) | 1.7717 |
| Depth of cut maximum - millimeter (APMX) | 45 |
| EDP number | 642603 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 34 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5983582 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S814HA25.0 |
| Overall length - inch (OAL) | 4.7638 |
| Overall length - millimeter (OAL) | 121 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 9 |
| Shank | Cylindrical shank DIN 6535 HA |
5983582
