20919/64 020019 Oxide 118° Taper Shank Jobber Drill 19/64 inch
- Write a review
$30.01
ApplicationAngleIcon_DICT_SELDrill point 118°Basic StandardANSICoatingSteam TemperedConnection size code machine side (CZC MS)1Cutting diameter - fractional inch (DC)19/64Cutting diameter - inch (DC)0.2969Cutting diameter - millimeter (DC)7.54Hand (Cutting direction)RightLength chip flute - fractional inch (LCF)3.1/8Length chip flute - inch (LCF)3.125Material code (BMC)HSSOverall length - fractional inch (OAL)6.3/8Overall length - inch (OAL)6.375Overall length - millimeter (OAL)161.93Point Angle (SIG)118ShankMorse Taper ShankSpiral formStandard SpiralUsable length (ULDR)4
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 118° |
| Basic Standard | ANSI |
| Coating | Steam Tempered |
| Connection size code machine side (CZC MS) | 1 |
| Cutting diameter - fractional inch (DC) | 19/64 |
| Cutting diameter - inch (DC) | 0.2969 |
| Cutting diameter - millimeter (DC) | 7.54 |
| Hand (Cutting direction) | Right |
| Length chip flute - fractional inch (LCF) | 3.1/8 |
| Length chip flute - inch (LCF) | 3.125 |
| Material code (BMC) | HSS |
| Overall length - fractional inch (OAL) | 6.3/8 |
| Overall length - inch (OAL) | 6.375 |
| Overall length - millimeter (OAL) | 161.93 |
| Point Angle (SIG) | 118 |
| Shank | Morse Taper Shank |
| Spiral form | Standard Spiral |
| Usable length (ULDR) | 4 |
20919/64
