Dormer C42820.0 5984922 Roughing End Mill 20.00 mm
- Write a review
$162.99
Basic StandardDIN 844 KCoatingALCRONACoating property (CTP)1Connection diameter - inch (DCON MS)0.7874Connection diameter - millimeter (DCON MS)20Cut lengthShortCutting diameter - inch (DC)0.7874Cutting diameter - millimeter (DC)20Cutting diameter tolerance class (TCDC)k12Depth of cut maximum - inch (APMX)1.4961Depth of cut maximum - millimeter (APMX)38EDP number70031Flute count (NOF)4Flute helix angle (FHA)35MaterialHSS-E-PMMID number5984922Mill ProfileHRA - Fine Pitch Asymmetrical Rounded Profile ChipbreakerNeck diameter - inch (DN)0.7677Neck diameter - millimeter (DN)19.5Ordering code ANSIC42820.0Overall length - inch (OAL)4.0945Overall length - millimeter (OAL)104Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)12ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)53.5
Specifications
| Basic Standard | DIN 844 K |
| Coating | ALCRONA |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.7874 |
| Connection diameter - millimeter (DCON MS) | 20 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.7874 |
| Cutting diameter - millimeter (DC) | 20 |
| Cutting diameter tolerance class (TCDC) | k12 |
| Depth of cut maximum - inch (APMX) | 1.4961 |
| Depth of cut maximum - millimeter (APMX) | 38 |
| EDP number | 70031 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 35 |
| Material | HSS-E-PM |
| MID number | 5984922 |
| Mill Profile | HRA - Fine Pitch Asymmetrical Rounded Profile Chipbreaker |
| Neck diameter - inch (DN) | 0.7677 |
| Neck diameter - millimeter (DN) | 19.5 |
| Ordering code ANSI | C42820.0 |
| Overall length - inch (OAL) | 4.0945 |
| Overall length - millimeter (OAL) | 104 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 53.5 |
5984922
