1534NE1/4X20X6 1020022 Extension Non-Relieved Style Tap UNC 2FL 1/4 inch x 20
- Write a review
$33.61
Basic StandardANSIClamping width - inch0.191CoatingBrightConnection diameter - inch (DCON MS)0.255Connection diameter - millimeter (DCON MS)6.48Flute count (NOF)2Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSSOverall length - millimeter (OAL)0.255Overall length - fractional inch (OAL)6"Overall length - inch (OAL)6ShankCylindrical shank with SquareTap chamfer style (TCS)plug chamfer three to six pitchThread diameter size (TDZ)1/4Thread form (THFT)UNC - Unified CoarseThreading length - fractional inch (THL)1"Threads per inch (TPI)20Tolerance limitH3Usable length (ULDR)2.5
Specifications
| Basic Standard | ANSI |
| Clamping width - inch | 0.191 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.255 |
| Connection diameter - millimeter (DCON MS) | 6.48 |
| Flute count (NOF) | 2 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Overall length - millimeter (OAL) | 0.255 |
| Overall length - fractional inch (OAL) | 6" |
| Overall length - inch (OAL) | 6 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | plug chamfer three to six pitch |
| Thread diameter size (TDZ) | 1/4 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - fractional inch (THL) | 1" |
| Threads per inch (TPI) | 20 |
| Tolerance limit | H3 |
| Usable length (ULDR) | 2.5 |
1534NE1/4X20X6