Dormer S2625.0XR0.5 6706930 Corner Radius End Mill 5.00 mm x 0.5 mm
- Write a review
$62.28
Basic StandardDORMERCoatingAlCrNCoating property (CTP)1Connection diameter - inch (DCON MS)0.2362Connection diameter - millimeter (DCON MS)6Corner radius - inch (RE)0.0197Corner radius - millimeter (RE)0.5Cut lengthShortCutting diameter - inch (DC)0.1969Cutting diameter - millimeter (DC)5Cutting diameter tolerance class (TCDC)h9Cutting pitch differential (CPDF)1Depth of cut maximum - inch (APMX)0.5906Depth of cut maximum - millimeter (APMX)15EDP number46706930Flute count (NOF)4Flute helix angle (FHA)40MaterialHMMaterial applicationH - Hardened materials, M - Stainless steel, P - Steel and cast steel, S - High-temperature alloysMID number6706930Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS2625.0XR0.5Overall length - inch (OAL)2.2441Overall length - millimeter (OAL)57Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)4ShankCylindrical shank DIN 6535 HA
Specifications
| Basic Standard | DORMER |
| Coating | AlCrN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.2362 |
| Connection diameter - millimeter (DCON MS) | 6 |
| Corner radius - inch (RE) | 0.0197 |
| Corner radius - millimeter (RE) | 0.5 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.1969 |
| Cutting diameter - millimeter (DC) | 5 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Cutting pitch differential (CPDF) | 1 |
| Depth of cut maximum - inch (APMX) | 0.5906 |
| Depth of cut maximum - millimeter (APMX) | 15 |
| EDP number | 46706930 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 40 |
| Material | HM |
| Material application | H - Hardened materials, M - Stainless steel, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 6706930 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S2625.0XR0.5 |
| Overall length - inch (OAL) | 2.2441 |
| Overall length - millimeter (OAL) | 57 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 4 |
| Shank | Cylindrical shank DIN 6535 HA |
6706930
