Dormer E91210-32 7350356 Machine Tap Blue Shark for Stainless Steel Spiral Flute 3FL No.10 x 32
- Write a review
$23.59
Basic StandardDIN/ANSIClamping width - inch0.15CoatingSUPER-BCoating property (CTP)1Connection diameter - inch (DCON MS)0.194Connection diameter - millimeter (DCON MS)4.93Coolant supply property (CSP)N21EDP number7350356Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)40Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationM - Stainless steelMID number7350356Ordering code ANSIE91210-32Overall length - inch (OAL)2.756Overall length - millimeter (OAL)0.194Premachined hole diameter - imperial (PHD)N21Premachined hole diameter - inch (PHD)0.1614Premachined hole diameter - millimeter (PHD)40ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)4.1Thread diameter size (TDZ)10Thread form (THFT)UNF - Unified FineThreading length - inch (THL)0.315Threads per inch (TPI)32Tolerance limitH3Usable length (ULDR)2.5Usable Length - inch (LU)1.102
Specifications
| Basic Standard | DIN/ANSI |
| Clamping width - inch | 0.15 |
| Coating | SUPER-B |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.194 |
| Connection diameter - millimeter (DCON MS) | 4.93 |
| Coolant supply property (CSP) | N21 |
| EDP number | 7350356 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 40 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | M - Stainless steel |
| MID number | 7350356 |
| Ordering code ANSI | E91210-32 |
| Overall length - inch (OAL) | 2.756 |
| Overall length - millimeter (OAL) | 0.194 |
| Premachined hole diameter - imperial (PHD) | N21 |
| Premachined hole diameter - inch (PHD) | 0.1614 |
| Premachined hole diameter - millimeter (PHD) | 40 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 4.1 |
| Thread diameter size (TDZ) | 10 |
| Thread form (THFT) | UNF - Unified Fine |
| Threading length - inch (THL) | 0.315 |
| Threads per inch (TPI) | 32 |
| Tolerance limit | H3 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 1.102 |
7350356