Whitney Tool 15176 Keyseat Milling Cutter, Style 110, 1/2" Cut Diameter, 1/32" Cut Width, w/ TiN CoatingKeyseat Milling Cutter,
- Write a review
$48.83
CoatingNo CoatingCut Diameter, Inch1/2"Cut Diameter, Metric12.7Cut Width1/32"EDP No15176MaterialHigh Speed SteelNeck Diameter0.13Number of Teeth12OD Tolerance0.666666667Overall Length2-1/32"Shank Dia. Tolerance0Shank Diameter1/2"Shank Length2Shank TypeStraightStyleStyle 110Tooth ConfigurationStraightTypeNarrow Width Slotting CuttersWidth Tolerance0WTC No605002T
Specifications
| Auxiliary lip | No |
| Design | CRW1 |
| Housing bore diameter | 65.049 mm, 2.561 in |
| Maximum operating temperature | 100.0 °C, 212.0 °F |
| Maximum operating temperature (°F) | 100.0 °C, 212.0 |
| Minimum operating temperature | -40.0 °C, -40.0 °F |
| Minimum operating temperature (°F) | -40.0 °C, -40.0 |
| Permissible circumferential speed | 6.74 m/s |
| Rotational speed | 3360.0 r/min |
| Seal width | 7.95 mm, 0.313 in |
| Sealing lip material | Nitrile rubber (NBR) |
| Shaft diameter | 38.1 mm, 1.5 in |
| Type of outside diameter | Metal-cased with sealant coating on the outside diameter |
| Unit system | Inch |
15176