Dormer E292M4 6305734 M Machine Forming Tap DIN 2174 5FL M4 x 0.70 mm
- Write a review
$40.72
Basic StandardDIN 2174Clamping Length - millimeter (LSC)6Clamping width - inch0.1339Clamping width - millimeter (WSC)3.4CoatingTiNCoating property (CTP)1Connection diameter - inch (DCON MS)0.1772Connection diameter - millimeter (DCON MS)4.5EDP number46305734Flute count (NOF)5Flute Geometry (FDC)Fluteless Geometry (Threadforming)Hand (Cutting direction)RightMaterialHSS-EMaterial applicationM - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number6305734Ordering code ANSIE292M4Overall length - inch (OAL)2.4803Overall length - millimeter (OAL)63Premachined hole diameter - inch (PHD)0.1457Premachined hole diameter - millimeter (PHD)3.7ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3.5Thread diameter size (TDZ)4Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0276Thread pitch - millimeter (TP)0.7Threading length - inch (THL)0.4724Threading length - millimeter (THL)12Usable length (ULDR)3Usable Length - inch (LU)0.8268Usable Length - millimeter (LU)21
Specifications
| Basic Standard | DIN 2174 |
| Clamping Length - millimeter (LSC) | 6 |
| Clamping width - inch | 0.1339 |
| Clamping width - millimeter (WSC) | 3.4 |
| Coating | TiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.1772 |
| Connection diameter - millimeter (DCON MS) | 4.5 |
| EDP number | 46305734 |
| Flute count (NOF) | 5 |
| Flute Geometry (FDC) | Fluteless Geometry (Threadforming) |
| Hand (Cutting direction) | Right |
| Material | HSS-E |
| Material application | M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 6305734 |
| Ordering code ANSI | E292M4 |
| Overall length - inch (OAL) | 2.4803 |
| Overall length - millimeter (OAL) | 63 |
| Premachined hole diameter - inch (PHD) | 0.1457 |
| Premachined hole diameter - millimeter (PHD) | 3.7 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3.5 |
| Thread diameter size (TDZ) | 4 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0276 |
| Thread pitch - millimeter (TP) | 0.7 |
| Threading length - inch (THL) | 0.4724 |
| Threading length - millimeter (THL) | 12 |
| Usable length (ULDR) | 3 |
| Usable Length - inch (LU) | 0.8268 |
| Usable Length - millimeter (LU) | 21 |
6305734
