Dormer E0218-32 5974369 UNC Machine Tap Spiral Point 3FL No.8 x 32
- Write a review
$24.82
Basic StandardISO 529Clamping Length - millimeter (LSC)6Clamping width - fractional inch (WSC)3.55Clamping width - inch0.1398CoatingSteam TemperedConnection diameter - inch (DCON MS)4.5Coolant supply property (CSP)4.166EDP number569122Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5974369Ordering code ANSIE0218-32Overall length - inch (OAL)2.0866Overall length - millimeter (OAL)53Premachined hole diameter - inch (PHD)0.1378Premachined hole diameter - millimeter (PHD)3.5ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - inch (TD)0.164Thread diameter - millimeter (TD)4.166Thread diameter size (TDZ)8Thread form (THFT)UNC - Unified CoarseThreading length - inch (THL)0.374Threading length - millimeter (THL)9.5Threads per inch (TPI)32Tolerance limitH3Usable length (ULDR)2.5Usable Length - inch (LU)0.6693Usable Length - millimeter (LU)17
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 6 |
| Clamping width - fractional inch (WSC) | 3.55 |
| Clamping width - inch | 0.1398 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 4.5 |
| Coolant supply property (CSP) | 4.166 |
| EDP number | 569122 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5974369 |
| Ordering code ANSI | E0218-32 |
| Overall length - inch (OAL) | 2.0866 |
| Overall length - millimeter (OAL) | 53 |
| Premachined hole diameter - inch (PHD) | 0.1378 |
| Premachined hole diameter - millimeter (PHD) | 3.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - inch (TD) | 0.164 |
| Thread diameter - millimeter (TD) | 4.166 |
| Thread diameter size (TDZ) | 8 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - inch (THL) | 0.374 |
| Threading length - millimeter (THL) | 9.5 |
| Threads per inch (TPI) | 32 |
| Tolerance limit | H3 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.6693 |
| Usable Length - millimeter (LU) | 17 |
5974369
