Pramet TPKN 43PDER:8215 6753422 Milling Insert - Square Shoulder
- Write a review
$11.80
Chipbreaker0.047Coating0.01Coating process0.004Coating property (CTP)1Cooling effectNo chipbreakerCorner radius - inch (RE)8215Corner radius - millimeter (RE)PVDCutting edge effective length - inch (LE)0.5Cutting edge effective length - millimeter (LE)12.7Cutting edge length - inch (L)0.866Cutting edge length - millimeter (L)22Depth of cut maximum - inch (APMX)0.669Depth of cut maximum - millimeter (APMX)17Feed maximal - millimeter0.25Feed minimal - millimeter0.1Feed_MAX_IMP_NUM0.039Feed_MIN_IMP_NUM1Inscribed circle diameter - inch (IC)0.14Inscribed circle diameter - millimeter (IC)3.55Insert cutting diameter - millimeter (CDI)4.76Insert thickness - millimeter (S)0.059Insert width - inch (W1)1.5Wiper edge length - inch (BS)Slightly negative effect on tool lifeWiper edge length - millimeter (BS)1.2
Specifications
| Chipbreaker | 0.047 |
| Coating | 0.01 |
| Coating process | 0.004 |
| Coating property (CTP) | 1 |
| Cooling effect | No chipbreaker |
| Corner radius - inch (RE) | 8215 |
| Corner radius - millimeter (RE) | PVD |
| Cutting edge effective length - inch (LE) | 0.5 |
| Cutting edge effective length - millimeter (LE) | 12.7 |
| Cutting edge length - inch (L) | 0.866 |
| Cutting edge length - millimeter (L) | 22 |
| Depth of cut maximum - inch (APMX) | 0.669 |
| Depth of cut maximum - millimeter (APMX) | 17 |
| Feed maximal - millimeter | 0.25 |
| Feed minimal - millimeter | 0.1 |
| Feed_MAX_IMP_NUM | 0.039 |
| Feed_MIN_IMP_NUM | 1 |
| Inscribed circle diameter - inch (IC) | 0.14 |
| Inscribed circle diameter - millimeter (IC) | 3.55 |
| Insert cutting diameter - millimeter (CDI) | 4.76 |
| Insert thickness - millimeter (S) | 0.059 |
| Insert width - inch (W1) | 1.5 |
| Wiper edge length - inch (BS) | Slightly negative effect on tool life |
| Wiper edge length - millimeter (BS) | 1.2 |
6753422
