Dormer E626M24 7350464 Machine Tap Red Shark for Alloy Steels Spiral Flute 4FL M24 x 3.00 mm
- Write a review
$283.84
Basic StandardDIN/ANSIClamping Length - millimeter (LSC)19Clamping width - inch0.567CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.76Connection diameter - millimeter (DCON MS)19.3Coolant supply property (CSP)53/64EDP number7350464Flute count (NOF)4Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)45Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number7350464Ordering code ANSIE626M24Overall length - inch (OAL)6.2992Overall length - millimeter (OAL)0.76Premachined hole diameter - imperial (PHD)53/64Premachined hole diameter - inch (PHD)0.8268Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)21Thread diameter size (TDZ)24Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.1181Thread pitch - millimeter (TP)3Threading length - inch (THL)1.1811Threading length - millimeter (THL)30Tolerance limitD8Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN/ANSI |
| Clamping Length - millimeter (LSC) | 19 |
| Clamping width - inch | 0.567 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.76 |
| Connection diameter - millimeter (DCON MS) | 19.3 |
| Coolant supply property (CSP) | 53/64 |
| EDP number | 7350464 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 45 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 7350464 |
| Ordering code ANSI | E626M24 |
| Overall length - inch (OAL) | 6.2992 |
| Overall length - millimeter (OAL) | 0.76 |
| Premachined hole diameter - imperial (PHD) | 53/64 |
| Premachined hole diameter - inch (PHD) | 0.8268 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 21 |
| Thread diameter size (TDZ) | 24 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.1181 |
| Thread pitch - millimeter (TP) | 3 |
| Threading length - inch (THL) | 1.1811 |
| Threading length - millimeter (THL) | 30 |
| Tolerance limit | D8 |
| Usable length (ULDR) | 2.5 |
7350464