Dormer E629M5 7350318 Machine Tap Blue Shark for Stainless Steel Plug Style 3FL M5 x 0.80 mm
- Write a review
$17.20
Basic StandardDIN/ANSIClamping Length - millimeter (LSC)6Clamping width - inch0.15CoatingSUPER-BCoating property (CTP)1Connection diameter - inch (DCON MS)0.194Connection diameter - millimeter (DCON MS)4.93EDP number7350318Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationM - Stainless steelMID number7350318Ordering code ANSIE629M5Overall length - inch (OAL)2.7559Overall length - millimeter (OAL)0.194Premachined hole diameter - imperial (PHD)N19Premachined hole diameter - inch (PHD)0.1654Premachined hole diameter - millimeter (PHD)4.2ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - millimeter (TD)N19Thread diameter size (TDZ)5Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0315Thread pitch - millimeter (TP)0.8Threading length - inch (THL)0.5118Threading length - millimeter (THL)13Tolerance limitD4Usable length (ULDR)2.5Usable Length - inch (LU)0.9843Usable Length - millimeter (LU)25
Specifications
| Basic Standard | DIN/ANSI |
| Clamping Length - millimeter (LSC) | 6 |
| Clamping width - inch | 0.15 |
| Coating | SUPER-B |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.194 |
| Connection diameter - millimeter (DCON MS) | 4.93 |
| EDP number | 7350318 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | M - Stainless steel |
| MID number | 7350318 |
| Ordering code ANSI | E629M5 |
| Overall length - inch (OAL) | 2.7559 |
| Overall length - millimeter (OAL) | 0.194 |
| Premachined hole diameter - imperial (PHD) | N19 |
| Premachined hole diameter - inch (PHD) | 0.1654 |
| Premachined hole diameter - millimeter (PHD) | 4.2 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - millimeter (TD) | N19 |
| Thread diameter size (TDZ) | 5 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0315 |
| Thread pitch - millimeter (TP) | 0.8 |
| Threading length - inch (THL) | 0.5118 |
| Threading length - millimeter (THL) | 13 |
| Tolerance limit | D4 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.9843 |
| Usable Length - millimeter (LU) | 25 |
7350318