Dormer C4138.0 5984419 Roughing End Mill 8.00 mm
- Write a review
$59.73
Basic StandardDIN 844 KCoatingTiCNCoating property (CTP)1Connection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Cut lengthShortCutting diameter - inch (DC)0.315Cutting diameter - millimeter (DC)8Cutting diameter tolerance class (TCDC)k12Depth of cut maximum - inch (APMX)0.748Depth of cut maximum - millimeter (APMX)19EDP number69103Flute count (NOF)4Flute helix angle (FHA)30MaterialHSS-EMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5984419Mill ProfileNF - Coarse Pitch Flat Profile ChipbreakerOrdering code ANSIC4138.0Overall length - inch (OAL)2.7165Overall length - millimeter (OAL)69Peripheral effective cutting edge count (ZEFP)4Radial rake angle (GAMF)12ShankWeldon shank DIN 1835B
Specifications
| Basic Standard | DIN 844 K |
| Coating | TiCN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.315 |
| Cutting diameter - millimeter (DC) | 8 |
| Cutting diameter tolerance class (TCDC) | k12 |
| Depth of cut maximum - inch (APMX) | 0.748 |
| Depth of cut maximum - millimeter (APMX) | 19 |
| EDP number | 69103 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5984419 |
| Mill Profile | NF - Coarse Pitch Flat Profile Chipbreaker |
| Ordering code ANSI | C4138.0 |
| Overall length - inch (OAL) | 2.7165 |
| Overall length - millimeter (OAL) | 69 |
| Peripheral effective cutting edge count (ZEFP) | 4 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
5984419
