Pramet DCMT 32.52-UR:T7325 7156252 Turning Insert - Positive
- Write a review
$8.96
ChipbreakerURCoatingT7325Coating processMT-CVDCoating property (CTP)1Cooling effectPositive effect on tool life - cooling is recommendedCorner radius - inch (RE)0.031Corner radius - millimeter (RE)0.8Cutting edge length - inch (L)0.457Cutting edge length - millimeter (L)11.6Depth of cut maximum - inch (APMX)0.079Depth of cut maximum - millimeter (APMX)2Depth of cut minimum - inch (APMN)0.031Depth of cut minimum - millimeter (APMN)0.8Feed maximal - millimeter0.48Feed minimal - millimeter0.15Feed_MAX_IMP_NUM0.019Feed_MIN_IMP_NUM0.006Fixing hole diameter - inch (D1)0.173Fixing hole diameter - millimeter (D1)4.4Inscribed circle diameter - inch (IC)0.375Inscribed circle diameter - millimeter (IC)9.525Insert thickness - millimeter (S)3.97
Specifications
| Chipbreaker | UR |
| Coating | T7325 |
| Coating process | MT-CVD |
| Coating property (CTP) | 1 |
| Cooling effect | Positive effect on tool life - cooling is recommended |
| Corner radius - inch (RE) | 0.031 |
| Corner radius - millimeter (RE) | 0.8 |
| Cutting edge length - inch (L) | 0.457 |
| Cutting edge length - millimeter (L) | 11.6 |
| Depth of cut maximum - inch (APMX) | 0.079 |
| Depth of cut maximum - millimeter (APMX) | 2 |
| Depth of cut minimum - inch (APMN) | 0.031 |
| Depth of cut minimum - millimeter (APMN) | 0.8 |
| Feed maximal - millimeter | 0.48 |
| Feed minimal - millimeter | 0.15 |
| Feed_MAX_IMP_NUM | 0.019 |
| Feed_MIN_IMP_NUM | 0.006 |
| Fixing hole diameter - inch (D1) | 0.173 |
| Fixing hole diameter - millimeter (D1) | 4.4 |
| Inscribed circle diameter - inch (IC) | 0.375 |
| Inscribed circle diameter - millimeter (IC) | 9.525 |
| Insert thickness - millimeter (S) | 3.97 |
7156252
