Dormer E8096-32 7350470 Machine Tap Yellow Shark for Low Alloy Steels Plug Style 3FL No.6 x 32
- Write a review
$16.37
Basic StandardDIN/ANSIClamping width - inch0.108CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.141Connection diameter - millimeter (DCON MS)3.58EDP number7350470Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number7350470Ordering code ANSIE8096-32Overall length - inch (OAL)2.205Overall length - millimeter (OAL)0.141Premachined hole diameter - imperial (PHD)N36Premachined hole diameter - inch (PHD)0.1122Premachined hole diameter - millimeter (PHD)2.85ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - millimeter (TD)N36Thread diameter size (TDZ)6Thread form (THFT)UNC - Unified CoarseThreading length - inch (THL)0.433Threads per inch (TPI)32Tolerance limitH2Usable length (ULDR)2.5Usable Length - inch (LU)0.787
Specifications
| Basic Standard | DIN/ANSI |
| Clamping width - inch | 0.108 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.141 |
| Connection diameter - millimeter (DCON MS) | 3.58 |
| EDP number | 7350470 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7350470 |
| Ordering code ANSI | E8096-32 |
| Overall length - inch (OAL) | 2.205 |
| Overall length - millimeter (OAL) | 0.141 |
| Premachined hole diameter - imperial (PHD) | N36 |
| Premachined hole diameter - inch (PHD) | 0.1122 |
| Premachined hole diameter - millimeter (PHD) | 2.85 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - millimeter (TD) | N36 |
| Thread diameter size (TDZ) | 6 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - inch (THL) | 0.433 |
| Threads per inch (TPI) | 32 |
| Tolerance limit | H2 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.787 |
7350470