E-Z LOK 41170 STI Tap - Bottoming - M14-2.0
- Write a review
$20.75
E-Z LOK - STI Tap - Bottoming - M14-2.0Screw thread insert taps (STI taps) operate in the same manner as “standard” taps, but produce an oversized thread specifically for E-Z Coil threaded inserts.During insert installation, the threads cut by an STI tap form the E-Z Coil insert into the desired thread size. STI taps are ideal for tapping holes in softer metals that require a strong threaded insert.E-Z LOK’s E-Z Coil STI taps are manufactured from high speed steel (HSS) for superior durability. We offer STI taps in a wide range of inch, metric, and spark plug sizes to meet your unique requirements.FeaturesThese are taps that will produce a larger than nominal size threaded hole to accommodate a helical screw thread insert. A variety of styles are available to tap holes in soft materials where a strong threaded insert is desired.ApplicationsPreparing a slightly larger thread for installation of E-Z Coil
Specifications
| Auxiliary lip | No |
| Design | CRWH1 |
| Housing bore diameter | 130.2 mm, 5.126 in |
| Maximum operating temperature | 100.0 °C, 212.0 °F |
| Maximum operating temperature (°F) | 100.0 °C, 212.0 |
| Minimum operating temperature | -40.0 °C, -40.0 °F |
| Minimum operating temperature (°F) | -40.0 °C, -40.0 |
| Permissible circumferential speed | 10.84 m/s |
| Rotational speed | 1980.0 r/min |
| Seal width | 11.13 mm, 0.438 in |
| Sealing lip material | Nitrile rubber (NBR) |
| Shaft diameter | 104.78 mm, 4.125 in |
| Type of outside diameter | Metal-cased with sealant coating on the outside diameter |
| Unit system | Inch |
41170
