Dormer R45817.8 5980509 Force-X Short Drill DIN 6537 K 17.80 mm
- Write a review
$430.33
ApplicationAngleIcon_DICT_SELDrill point 140°Basic StandardDIN 6537 KCoatingTiAlNCoating property (CTP)1Connection diameter - inch (DCON MS)0.7087Connection diameter - millimeter (DCON MS)18Connection diameter tolerance machine side (TCDCONMS)h6Coolant supply property (CSP)0Cutting diameter - inch (DC)0.7008Cutting diameter - millimeter (DC)17.8Cutting diameter tolerance class (TCDC)m7EDP number135273Hand (Cutting direction)RightLength chip flute - inch (LCF)2.874Length chip flute - millimeter (LCF)73MaterialHMMaterial applicationH - Hardened materials, K - Cast iron, N - Non-ferrous metals, P - Steel and cast steelMID number5980509Ordering code ANSIR45817.8Overall length - inch (OAL)4.8425Overall length - millimeter (OAL)123Point Angle (SIG)140ShankCylindrical shank DIN 6535 HAShank length - millimeter (LS)48Spiral formCTWUsable length (ULDR)3
Specifications
| ApplicationAngleIcon_DICT_SEL | Drill point 140° |
| Basic Standard | DIN 6537 K |
| Coating | TiAlN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.7087 |
| Connection diameter - millimeter (DCON MS) | 18 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Coolant supply property (CSP) | 0 |
| Cutting diameter - inch (DC) | 0.7008 |
| Cutting diameter - millimeter (DC) | 17.8 |
| Cutting diameter tolerance class (TCDC) | m7 |
| EDP number | 135273 |
| Hand (Cutting direction) | Right |
| Length chip flute - inch (LCF) | 2.874 |
| Length chip flute - millimeter (LCF) | 73 |
| Material | HM |
| Material application | H - Hardened materials, K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5980509 |
| Ordering code ANSI | R45817.8 |
| Overall length - inch (OAL) | 4.8425 |
| Overall length - millimeter (OAL) | 123 |
| Point Angle (SIG) | 140 |
| Shank | Cylindrical shank DIN 6535 HA |
| Shank length - millimeter (LS) | 48 |
| Spiral form | CTW |
| Usable length (ULDR) | 3 |
5980509
