Dormer S2061/4 7648497 2FL 1/4 inch
- Write a review
$30.11
Basic StandardDORMER"CoatingZrNCoating property (CTP)0Connection diameter - fractional inch (DCON MS)1/4Connection diameter - inch (DCON MS)0.25Connection diameter - millimeter (DCON MS)6.35Cut lengthMediumCutting diameter - fractional inch (DC)1/4Cutting diameter - inch (DC)0.25Cutting diameter - millimeter (DC)6.35Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - fractional inch (APMX)1EDP number7648497Flute count (NOF)2Flute helix angle (FHA)45MaterialHMMaterial applicationN - Non-ferrous metalsMID number7648497Mill ProfileW - Non-ferrous Cutter Type for Soft Malleable MaterialsOrdering code ANSIS2061/4Overall length - fractional inch (OAL)2.1/2Overall length - inch (OAL)2.5Overall length - millimeter (OAL)63.5Radial rake angle (GAMF)10ShankCylindrical shank
Specifications
| Basic Standard | DORMER" |
| Coating | ZrN |
| Coating property (CTP) | 0 |
| Connection diameter - fractional inch (DCON MS) | 1/4 |
| Connection diameter - inch (DCON MS) | 0.25 |
| Connection diameter - millimeter (DCON MS) | 6.35 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 1/4 |
| Cutting diameter - inch (DC) | 0.25 |
| Cutting diameter - millimeter (DC) | 6.35 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - fractional inch (APMX) | 1 |
| EDP number | 7648497 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 45 |
| Material | HM |
| Material application | N - Non-ferrous metals |
| MID number | 7648497 |
| Mill Profile | W - Non-ferrous Cutter Type for Soft Malleable Materials |
| Ordering code ANSI | S2061/4 |
| Overall length - fractional inch (OAL) | 2.1/2 |
| Overall length - inch (OAL) | 2.5 |
| Overall length - millimeter (OAL) | 63.5 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank |
7648497
