Dormer E0285/8 5974043 UNC Machine Tap Spiral Flute 45° 5/8 inch x 11
- Write a review
$103.44
Basic StandardANSIClamping width - inch0.36CoatingSteam TemperedConnection diameter - inch (DCON MS)0.48Connection diameter - millimeter (DCON MS)12.19Coolant supply property (CSP)17/32EDP number581773Flute count (NOF)3Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)45Hand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5974043Ordering code ANSIE0285/8Overall length - fractional inch (OAL)3.13/16Overall length - inch (OAL)3.8125Overall length - millimeter (OAL)0.48Premachined hole diameter - imperial (PHD)17/32Premachined hole diameter - inch (PHD)0.5315Premachined hole diameter - millimeter (PHD)45ShankCylindrical shank with SquareTap chamfer style (TCS)C 2 - 3Thread diameter - millimeter (TD)13.5Thread diameter size (TDZ)5/8Thread form (THFT)UNC - Unified CoarseThreading length - inch (THL)0.7087Threads per inch (TPI)11Tolerance limitH3Usable length (ULDR)2.5
Specifications
| Basic Standard | ANSI |
| Clamping width - inch | 0.36 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 0.48 |
| Connection diameter - millimeter (DCON MS) | 12.19 |
| Coolant supply property (CSP) | 17/32 |
| EDP number | 581773 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 45 |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5974043 |
| Ordering code ANSI | E0285/8 |
| Overall length - fractional inch (OAL) | 3.13/16 |
| Overall length - inch (OAL) | 3.8125 |
| Overall length - millimeter (OAL) | 0.48 |
| Premachined hole diameter - imperial (PHD) | 17/32 |
| Premachined hole diameter - inch (PHD) | 0.5315 |
| Premachined hole diameter - millimeter (PHD) | 45 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | C 2 - 3 |
| Thread diameter - millimeter (TD) | 13.5 |
| Thread diameter size (TDZ) | 5/8 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - inch (THL) | 0.7087 |
| Threads per inch (TPI) | 11 |
| Tolerance limit | H3 |
| Usable length (ULDR) | 2.5 |
5974043
