Dormer S13411/64 7648733 End Mill 4FL 11/64 inch
- Write a review
$17.28
Basic StandardDORMERCoatingBrightConnection diameter - fractional inch (DCON MS)3/16Connection diameter - inch (DCON MS)0.1875Connection diameter - millimeter (DCON MS)4.76Cut lengthMediumCutting diameter - fractional inch (DC)11/64Cutting diameter - inch (DC)0.1719Cutting diameter - millimeter (DC)4.37Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - fractional inch (APMX)9/16EDP number7648733Flute count (NOF)4Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steelMID number7648733Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS13411/64Overall length - fractional inch (OAL)2"Overall length - inch (OAL)2Overall length - millimeter (OAL)50.8Radial rake angle (GAMF)10ShankCylindrical shank
Specifications
| Basic Standard | DORMER |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 3/16 |
| Connection diameter - inch (DCON MS) | 0.1875 |
| Connection diameter - millimeter (DCON MS) | 4.76 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 11/64 |
| Cutting diameter - inch (DC) | 0.1719 |
| Cutting diameter - millimeter (DC) | 4.37 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - fractional inch (APMX) | 9/16 |
| EDP number | 7648733 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7648733 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S13411/64 |
| Overall length - fractional inch (OAL) | 2" |
| Overall length - inch (OAL) | 2 |
| Overall length - millimeter (OAL) | 50.8 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank |
7648733
