Dormer E8151/4 7350231 Machine Tap White Shark for Cast Iron Full Bottoming 4FL 1/4 inch x 20
- Write a review
$48.24
Basic StandardDIN/ANSIClamping width - inch0.189Clamping width - millimeter (WSC)1CoatingTiAlN/TopCoating property (CTP)1Connection diameter - inch (DCON MS)0.255Connection diameter - millimeter (DCON MS)6.48Coolant exit style (CXSC)axial concentric exitCooling (CSP)1EDP number7350231Flute count (NOF)4Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationK - Cast iron, N - Non-ferrous metalsMID number7350231Ordering code ANSIE8151/4Overall length - inch (OAL)3.15Premachined hole diameter - imperial (PHD)N7Premachined hole diameter - inch (PHD)0.2008Premachined hole diameter - millimeter (PHD)5.1ShankCylindrical shank with SquareTap chamfer style (TCS)E 1.5 - 2Thread diameter - millimeter (TD)N7Thread diameter size (TDZ)1/4Thread form (THFT)UNC - Unified CoarseThreading length - inch (THL)0.591Threads per inch (TPI)20Tolerance limitH5Usable length (ULDR)2.5Usable Length - inch (LU)0.984
Specifications
| Basic Standard | DIN/ANSI |
| Clamping width - inch | 0.189 |
| Clamping width - millimeter (WSC) | 1 |
| Coating | TiAlN/Top |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.255 |
| Connection diameter - millimeter (DCON MS) | 6.48 |
| Coolant exit style (CXSC) | axial concentric exit |
| Cooling (CSP) | 1 |
| EDP number | 7350231 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | K - Cast iron, N - Non-ferrous metals |
| MID number | 7350231 |
| Ordering code ANSI | E8151/4 |
| Overall length - inch (OAL) | 3.15 |
| Premachined hole diameter - imperial (PHD) | N7 |
| Premachined hole diameter - inch (PHD) | 0.2008 |
| Premachined hole diameter - millimeter (PHD) | 5.1 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | E 1.5 - 2 |
| Thread diameter - millimeter (TD) | N7 |
| Thread diameter size (TDZ) | 1/4 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - inch (THL) | 0.591 |
| Threads per inch (TPI) | 20 |
| Tolerance limit | H5 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.984 |
7350231