Dormer C50520.0 5985485 Ball-Nosed End Mill 20.00 mm
- Write a review
$151.82
Basic StandardDIN 844 KCoatingBrightConnection diameter - inch (DCON MS)0.7874Connection diameter - millimeter (DCON MS)20Corner radius - inch (RE)0.3937Corner radius - millimeter (RE)10Cut lengthShortCutting diameter - inch (DC)0.7874Cutting diameter - millimeter (DC)20Cutting diameter tolerance class (TCDC)e8Depth of cut maximum - inch (APMX)1.4961Depth of cut maximum - millimeter (APMX)38EDP number73575Flute count (NOF)2Flute helix angle (FHA)30MaterialHSS-EMaterial applicationN - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5985485Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.7677Neck diameter - millimeter (DN)19.5Ordering code ANSIC50520.0Overall length - inch (OAL)4.0945Overall length - millimeter (OAL)104Peripheral effective cutting edge count (ZEFP)2Profile radius - millimeter (PRFRAD)0Radial rake angle (GAMF)12ShankWeldon shank DIN 1835BUsable Length - millimeter (LU)53.5
Specifications
| Basic Standard | DIN 844 K |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.7874 |
| Connection diameter - millimeter (DCON MS) | 20 |
| Corner radius - inch (RE) | 0.3937 |
| Corner radius - millimeter (RE) | 10 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.7874 |
| Cutting diameter - millimeter (DC) | 20 |
| Cutting diameter tolerance class (TCDC) | e8 |
| Depth of cut maximum - inch (APMX) | 1.4961 |
| Depth of cut maximum - millimeter (APMX) | 38 |
| EDP number | 73575 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E |
| Material application | N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5985485 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.7677 |
| Neck diameter - millimeter (DN) | 19.5 |
| Ordering code ANSI | C50520.0 |
| Overall length - inch (OAL) | 4.0945 |
| Overall length - millimeter (OAL) | 104 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Profile radius - millimeter (PRFRAD) | 0 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
| Usable Length - millimeter (LU) | 53.5 |
5985485
