Dormer S1093.0 7648560 End Mill 3.00 mm
- Write a review
$11.28
Basic StandardDORMERCoatingBrightConnection diameter - inch (DCON MS)0.1181Connection diameter - millimeter (DCON MS)3Cut lengthMediumCutting diameter - inch (DC)0.1181Cutting diameter - millimeter (DC)3Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - inch (APMX)0.4724Depth of cut maximum - millimeter (APMX)12EDP number7648560Flute count (NOF)2Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, N - Non-ferrous metals, P - Steel and cast steelMID number7648560Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS1093.0Overall length - inch (OAL)1.4961Overall length - millimeter (OAL)38Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)10ShankCylindrical shank
Specifications
| Basic Standard | DORMER |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.1181 |
| Connection diameter - millimeter (DCON MS) | 3 |
| Cut length | Medium |
| Cutting diameter - inch (DC) | 0.1181 |
| Cutting diameter - millimeter (DC) | 3 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - inch (APMX) | 0.4724 |
| Depth of cut maximum - millimeter (APMX) | 12 |
| EDP number | 7648560 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 7648560 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S1093.0 |
| Overall length - inch (OAL) | 1.4961 |
| Overall length - millimeter (OAL) | 38 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank |
7648560
