Dormer C12222.0 5984262 End Mill 22.00 mm
- Write a review
$128.38
Basic StandardDORMERCoatingBrightConnection diameter - inch (DCON MS)0.7874Connection diameter - millimeter (DCON MS)20Cut lengthLongCutting diameter - inch (DC)0.8661Cutting diameter - millimeter (DC)22Cutting diameter tolerance class (TCDC)e8Depth of cut maximum - inch (APMX)2.9528Depth of cut maximum - millimeter (APMX)75EDP number56479Flute count (NOF)2Flute helix angle (FHA)30MaterialHSS-EMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5984262Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.7677Neck diameter - millimeter (DN)19.5Ordering code ANSIC12222.0Overall length - inch (OAL)6.6929Overall length - millimeter (OAL)170Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)12ShankCylindrical shank DIN 1835AUsable Length - millimeter (LU)90.5
Specifications
| Basic Standard | DORMER |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.7874 |
| Connection diameter - millimeter (DCON MS) | 20 |
| Cut length | Long |
| Cutting diameter - inch (DC) | 0.8661 |
| Cutting diameter - millimeter (DC) | 22 |
| Cutting diameter tolerance class (TCDC) | e8 |
| Depth of cut maximum - inch (APMX) | 2.9528 |
| Depth of cut maximum - millimeter (APMX) | 75 |
| EDP number | 56479 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5984262 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.7677 |
| Neck diameter - millimeter (DN) | 19.5 |
| Ordering code ANSI | C12222.0 |
| Overall length - inch (OAL) | 6.6929 |
| Overall length - millimeter (OAL) | 170 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 12 |
| Shank | Cylindrical shank DIN 1835A |
| Usable Length - millimeter (LU) | 90.5 |
5984262
