Dormer S21310.0 7648629 Ball-Nosed End Mill 10.00 mm
- Write a review
$56.11
Basic StandardDORMERCoatingTiAlNCoating property (CTP)1Connection diameter - millimeter (DCON MS)10Corner radius - inch (RE)0.197Corner radius - millimeter (RE)5Cut lengthMediumCutting diameter - inch (DC)0.3937Cutting diameter - millimeter (DC)10Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - inch (APMX)0.8661Depth of cut maximum - millimeter (APMX)22EDP number7648629Flute count (NOF)2Flute helix angle (FHA)30MaterialHMMaterial applicationK - Cast iron, M - Stainless steel, P - Steel and cast steel, S - High-temperature alloysMID number7648629Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS21310.0Overall length - inch (OAL)2.7559Overall length - millimeter (OAL)70Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)10ShankCylindrical shank
Specifications
| Basic Standard | DORMER |
| Coating | TiAlN |
| Coating property (CTP) | 1 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Corner radius - inch (RE) | 0.197 |
| Corner radius - millimeter (RE) | 5 |
| Cut length | Medium |
| Cutting diameter - inch (DC) | 0.3937 |
| Cutting diameter - millimeter (DC) | 10 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - inch (APMX) | 0.8661 |
| Depth of cut maximum - millimeter (APMX) | 22 |
| EDP number | 7648629 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HM |
| Material application | K - Cast iron, M - Stainless steel, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 7648629 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S21310.0 |
| Overall length - inch (OAL) | 2.7559 |
| Overall length - millimeter (OAL) | 70 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank |
7648629
