Dormer EP00M8DIN376 5973449 Machine Tap Spiral Point 3FL M8 x 1.25 mm
- Write a review
$26.04
Basic StandardDIN 376Clamping Length - millimeter (LSC)8Clamping width - fractional inch (WSC)4.9Clamping width - inch0.1929CoatingBrightConnection diameter - inch (DCON MS)6EDP number135907Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5973449Ordering code ANSIEP00M8DIN376Overall length - inch (OAL)3.5433Overall length - millimeter (OAL)90Premachined hole diameter - inch (PHD)0.2677Premachined hole diameter - millimeter (PHD)6.8ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter size (TDZ)8Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0492Thread pitch - millimeter (TP)1.25Threading length - inch (THL)0.7087Threading length - millimeter (THL)18Tolerance limitD5Usable length (ULDR)2.5Usable Length - inch (LU)1.378Usable Length - millimeter (LU)35
Specifications
| Basic Standard | DIN 376 |
| Clamping Length - millimeter (LSC) | 8 |
| Clamping width - fractional inch (WSC) | 4.9 |
| Clamping width - inch | 0.1929 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 6 |
| EDP number | 135907 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5973449 |
| Ordering code ANSI | EP00M8DIN376 |
| Overall length - inch (OAL) | 3.5433 |
| Overall length - millimeter (OAL) | 90 |
| Premachined hole diameter - inch (PHD) | 0.2677 |
| Premachined hole diameter - millimeter (PHD) | 6.8 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter size (TDZ) | 8 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0492 |
| Thread pitch - millimeter (TP) | 1.25 |
| Threading length - inch (THL) | 0.7087 |
| Threading length - millimeter (THL) | 18 |
| Tolerance limit | D5 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 1.378 |
| Usable Length - millimeter (LU) | 35 |
5973449
