Pramet 802D-40-80-S40 6820789 Indexable Drill 2 x D
- Write a review
$588.14
Adjustment limit maximum - millimeter (ADJLX)0.5Adjustment limit minimum - millimeter (ADJLN)0.2Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)1.575Connection diameter - millimeter (DCON MS)40Connection diameter tolerance machine side (TCDCONMS)h6Coolant supply property (CSP)1Cutting diameter - inch (DC)1.575Cutting diameter - millimeter (DC)40Cutting edge count (CEDC)1Depth of cut maximum - inch (APMX)3.1496Depth of cut maximum - millimeter (APMX)80Flange diameter - millimeter (DF)50Overall length - inch (OAL)7.205Overall length - millimeter (OAL)183Protruding length - inch (LPR)4.5276Protruding length - millimeter (LPR)115ShankCylindrical Shank ISO 9766Shank length - inch (LS)2.6772Shank length - millimeter (LS)68Usable length (ULDR)2Usable Length - inch (LU)3.5433Usable Length - millimeter (LU)90
Specifications
| Adjustment limit maximum - millimeter (ADJLX) | 0.5 |
| Adjustment limit minimum - millimeter (ADJLN) | 0.2 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 1.575 |
| Connection diameter - millimeter (DCON MS) | 40 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 1.575 |
| Cutting diameter - millimeter (DC) | 40 |
| Cutting edge count (CEDC) | 1 |
| Depth of cut maximum - inch (APMX) | 3.1496 |
| Depth of cut maximum - millimeter (APMX) | 80 |
| Flange diameter - millimeter (DF) | 50 |
| Overall length - inch (OAL) | 7.205 |
| Overall length - millimeter (OAL) | 183 |
| Protruding length - inch (LPR) | 4.5276 |
| Protruding length - millimeter (LPR) | 115 |
| Shank | Cylindrical Shank ISO 9766 |
| Shank length - inch (LS) | 2.6772 |
| Shank length - millimeter (LS) | 68 |
| Usable length (ULDR) | 2 |
| Usable Length - inch (LU) | 3.5433 |
| Usable Length - millimeter (LU) | 90 |
6820789
