Dormer A217N4 5969418 120° Centre Drill - 82° Short ANSI N4
- Write a review
$6.42
ApplicationAngleIcon_DICT_SELCenter drilling 82°Basic StandardANSICoatingBrightConnection diameter - fractional inch (DCON MS)5/16Connection diameter - inch (DCON MS)0.3125Connection diameter - millimeter (DCON MS)7.94Cutting diameter - inch (DC)0.125Cutting diameter - millimeter (DC)3.18EDP number239247Hand (Cutting direction)RightInternal designation number4Length chip flute - fractional inch (LCF)45/64Length chip flute - inch (LCF)0.7031MaterialHSSMaterial applicationK - Cast iron, P - Steel and cast steelMID number5969418Ordering code ANSIA217N4Overall length - fractional inch (OAL)2.1/8Overall length - millimeter (OAL)53.98Point Angle (SIG)120ShankCylindrical shankStep included angle (STA)82Usable length (ULDR)1
Specifications
| ApplicationAngleIcon_DICT_SEL | Center drilling 82° |
| Basic Standard | ANSI |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 5/16 |
| Connection diameter - inch (DCON MS) | 0.3125 |
| Connection diameter - millimeter (DCON MS) | 7.94 |
| Cutting diameter - inch (DC) | 0.125 |
| Cutting diameter - millimeter (DC) | 3.18 |
| EDP number | 239247 |
| Hand (Cutting direction) | Right |
| Internal designation number | 4 |
| Length chip flute - fractional inch (LCF) | 45/64 |
| Length chip flute - inch (LCF) | 0.7031 |
| Material | HSS |
| Material application | K - Cast iron, P - Steel and cast steel |
| MID number | 5969418 |
| Ordering code ANSI | A217N4 |
| Overall length - fractional inch (OAL) | 2.1/8 |
| Overall length - millimeter (OAL) | 53.98 |
| Point Angle (SIG) | 120 |
| Shank | Cylindrical shank |
| Step included angle (STA) | 82 |
| Usable length (ULDR) | 1 |
5969418
