Dormer C1232.5 5984375 Slot Drill 2.50 mm
- Write a review
$27.02
Basic StandardDIN 844 KCoatingBrightConnection diameter - inch (DCON MS)0.2362Connection diameter - millimeter (DCON MS)6Connection diameter tolerance machine side (TCDCONMS)h6Cut lengthShortCutting diameter - inch (DC)0.0984Cutting diameter - millimeter (DC)2.5Cutting diameter tolerance class (TCDC)e8Depth of cut maximum - inch (APMX)0.315Depth of cut maximum - millimeter (APMX)8EDP number353653Flute count (NOF)2Flute helix angle (FHA)30MaterialHSS-E-PMMaterial applicationN - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number5984375Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIC1232.5Overall length - inch (OAL)2.0472Overall length - millimeter (OAL)52Peripheral effective cutting edge count (ZEFP)2Radial rake angle (GAMF)12ShankWeldon shank DIN 1835B
Specifications
| Basic Standard | DIN 844 K |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.2362 |
| Connection diameter - millimeter (DCON MS) | 6 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Cut length | Short |
| Cutting diameter - inch (DC) | 0.0984 |
| Cutting diameter - millimeter (DC) | 2.5 |
| Cutting diameter tolerance class (TCDC) | e8 |
| Depth of cut maximum - inch (APMX) | 0.315 |
| Depth of cut maximum - millimeter (APMX) | 8 |
| EDP number | 353653 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E-PM |
| Material application | N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 5984375 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | C1232.5 |
| Overall length - inch (OAL) | 2.0472 |
| Overall length - millimeter (OAL) | 52 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Radial rake angle (GAMF) | 12 |
| Shank | Weldon shank DIN 1835B |
5984375
