Dormer C6023/4 7647871 Keyway End Mill 2FL 3/4 inch
- Write a review
$51.35
Basic StandardANSICoatingBrightConnection diameter - fractional inch (DCON MS)3/4Connection diameter - inch (DCON MS)0.75Connection diameter - millimeter (DCON MS)19.05Cut lengthMediumCutting diameter - fractional inch (DC)3/4Cutting diameter - inch (DC)0.75Cutting diameter - millimeter (DC)19.05Cutting diameter tolerance class (TCDC)ANSI +.0001/-.0015Depth of cut maximum - fractional inch (APMX)1.5/16EDP number7647871Flute count (NOF)2Flute helix angle (FHA)30MaterialHSSMaterial applicationP - Steel and cast steelMID number7647871Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIC6023/4Overall length - fractional inch (OAL)3.7/8Overall length - inch (OAL)3.875Overall length - millimeter (OAL)98.43Radial rake angle (GAMF)8ShankCylindrical shank
Specifications
| Basic Standard | ANSI |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 3/4 |
| Connection diameter - inch (DCON MS) | 0.75 |
| Connection diameter - millimeter (DCON MS) | 19.05 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 3/4 |
| Cutting diameter - inch (DC) | 0.75 |
| Cutting diameter - millimeter (DC) | 19.05 |
| Cutting diameter tolerance class (TCDC) | ANSI +.0001/-.0015 |
| Depth of cut maximum - fractional inch (APMX) | 1.5/16 |
| EDP number | 7647871 |
| Flute count (NOF) | 2 |
| Flute helix angle (FHA) | 30 |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 7647871 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | C6023/4 |
| Overall length - fractional inch (OAL) | 3.7/8 |
| Overall length - inch (OAL) | 3.875 |
| Overall length - millimeter (OAL) | 98.43 |
| Radial rake angle (GAMF) | 8 |
| Shank | Cylindrical shank |
7647871
