Dormer C6181/8 7648008 End Mill ANSI 4FL 1/8 inch
- Write a review
$34.89
Basic StandardANSICoatingBrightConnection diameter - fractional inch (DCON MS)3/8Connection diameter - inch (DCON MS)0.375Connection diameter - millimeter (DCON MS)9.53Cut lengthMediumCutting diameter - fractional inch (DC)1/8Cutting diameter - inch (DC)0.125Cutting diameter - millimeter (DC)3.18Cutting diameter tolerance class (TCDC)ANSI +.003/-.000Depth of cut maximum - fractional inch (APMX)3/8EDP number7648008Flute count (NOF)4Flute helix angle (FHA)30MaterialHSS-EMaterial applicationN - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloysMID number7648008Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIC6181/8Overall length - fractional inch (OAL)2.5/16Overall length - inch (OAL)2.3125Overall length - millimeter (OAL)58.74Radial rake angle (GAMF)10ShankCylindrical shank
Specifications
| Basic Standard | ANSI |
| Coating | Bright |
| Connection diameter - fractional inch (DCON MS) | 3/8 |
| Connection diameter - inch (DCON MS) | 0.375 |
| Connection diameter - millimeter (DCON MS) | 9.53 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 1/8 |
| Cutting diameter - inch (DC) | 0.125 |
| Cutting diameter - millimeter (DC) | 3.18 |
| Cutting diameter tolerance class (TCDC) | ANSI +.003/-.000 |
| Depth of cut maximum - fractional inch (APMX) | 3/8 |
| EDP number | 7648008 |
| Flute count (NOF) | 4 |
| Flute helix angle (FHA) | 30 |
| Material | HSS-E |
| Material application | N - Non-ferrous metals, P - Steel and cast steel, S - High-temperature alloys |
| MID number | 7648008 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | C6181/8 |
| Overall length - fractional inch (OAL) | 2.5/16 |
| Overall length - inch (OAL) | 2.3125 |
| Overall length - millimeter (OAL) | 58.74 |
| Radial rake angle (GAMF) | 10 |
| Shank | Cylindrical shank |
7648008
