1785NRM4.5 1012899 Non-Relieved Style Tap 2FL M4.5 x 0.75 mm
- Write a review
$7.21
Basic StandardANSIClamping width - fractional inch (WSC)1/4Clamping width - inch0.152CoatingBrightConnection diameter - millimeter (DCON MS)1/4Connection diameter - inch (DCON MS)0.152Flute count (NOF)2Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSSOverall length - millimeter (OAL)0.152Overall length - fractional inch (OAL)2.3/8Overall length - inch (OAL)2.375ShankCylindrical shank with SquareThread diameter size (TDZ)4.5Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0295Thread pitch - millimeter (TP)0.75Threading length - fractional inch (THL)7/8Tolerance limitD4Usable length (ULDR)2.5
Specifications
| Basic Standard | ANSI |
| Clamping width - fractional inch (WSC) | 1/4 |
| Clamping width - inch | 0.152 |
| Coating | Bright |
| Connection diameter - millimeter (DCON MS) | 1/4 |
| Connection diameter - inch (DCON MS) | 0.152 |
| Flute count (NOF) | 2 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Overall length - millimeter (OAL) | 0.152 |
| Overall length - fractional inch (OAL) | 2.3/8 |
| Overall length - inch (OAL) | 2.375 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 4.5 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0295 |
| Thread pitch - millimeter (TP) | 0.75 |
| Threading length - fractional inch (THL) | 7/8 |
| Tolerance limit | D4 |
| Usable length (ULDR) | 2.5 |
1785NRM4.5
