Pramet 20L2R055A25-SZP20-C 6761628 End Milling Cutter - Copy And Profile
- Write a review
$370.16
Axial rake angle (GAMP)-10Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)0.984Connection diameter - millimeter (DCON MS)25Connection size code machine side (CZC MS)-Coolant supply property (CSP)1Cutting diameter maximum - inch (DCX)0.787Cutting diameter maximum - millimeter (DCX)20Depth of cut maximum - millimeter (APMX)17.9Hand (Cutting direction)RightInsert group used in the toolZP 20Insert index count (NOI)2Maximum ramping angle (RMPX)17.9Not recomendedFinishing - very good surface qualityOverall length - inch (OAL)7.874Overall length - millimeter (OAL)200Peripheral effective cutting edge count (ZEFP)2Possible useRoughingRadial rake angle (GAMF)0Rotational speed maximum (RPMX)24000ShankCylindrical shank DIN 1835AUsable Length maximum - millimeter (LUX)36.1
Specifications
| Axial rake angle (GAMP) | -10 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 0.984 |
| Connection diameter - millimeter (DCON MS) | 25 |
| Connection size code machine side (CZC MS) | - |
| Coolant supply property (CSP) | 1 |
| Cutting diameter maximum - inch (DCX) | 0.787 |
| Cutting diameter maximum - millimeter (DCX) | 20 |
| Depth of cut maximum - millimeter (APMX) | 17.9 |
| Hand (Cutting direction) | Right |
| Insert group used in the tool | ZP 20 |
| Insert index count (NOI) | 2 |
| Maximum ramping angle (RMPX) | 17.9 |
| Not recomended | Finishing - very good surface quality |
| Overall length - inch (OAL) | 7.874 |
| Overall length - millimeter (OAL) | 200 |
| Peripheral effective cutting edge count (ZEFP) | 2 |
| Possible use | Roughing |
| Radial rake angle (GAMF) | 0 |
| Rotational speed maximum (RPMX) | 24000 |
| Shank | Cylindrical shank DIN 1835A |
| Usable Length maximum - millimeter (LUX) | 36.1 |
6761628
