Pramet A16Q-GGER 0313 6758153 Boring Bar For Grooving - Right Hand
- Write a review
$211.52
Clamping Type Code (MTP)System GConnection diameter - inch (DCON MS)0.63Connection diameter - millimeter (DCON MS)16Coolant supply property (CSP)1Cutting depth maximum - inch (CDX)0.1181Cutting depth maximum - millimeter (CDX)3Cutting width - inch (CW)0.1181Cutting width - millimeter (CW)3Direction of toolRightFunctional height - inch (HF)0.295Functional height - millimeter (HF)7.5Functional length - inch (LF)7.087Functional length - millimeter (LF)180Head length - inch (LH)0.984Head length - millimeter (LH)25Insert group used in the toolLCM. 0313..Minimum bore diameter - inch (DMIN)0.63Minimum bore diameter - millimeter (DMIN)16Primary useMedium machiningShank height - inch (H)0.591Shank height - millimeter (H)15Shank width - inch (B)0.61Shank width - millimeter (B)15.5
Specifications
| Clamping Type Code (MTP) | System G |
| Connection diameter - inch (DCON MS) | 0.63 |
| Connection diameter - millimeter (DCON MS) | 16 |
| Coolant supply property (CSP) | 1 |
| Cutting depth maximum - inch (CDX) | 0.1181 |
| Cutting depth maximum - millimeter (CDX) | 3 |
| Cutting width - inch (CW) | 0.1181 |
| Cutting width - millimeter (CW) | 3 |
| Direction of tool | Right |
| Functional height - inch (HF) | 0.295 |
| Functional height - millimeter (HF) | 7.5 |
| Functional length - inch (LF) | 7.087 |
| Functional length - millimeter (LF) | 180 |
| Head length - inch (LH) | 0.984 |
| Head length - millimeter (LH) | 25 |
| Insert group used in the tool | LCM. 0313.. |
| Minimum bore diameter - inch (DMIN) | 0.63 |
| Minimum bore diameter - millimeter (DMIN) | 16 |
| Primary use | Medium machining |
| Shank height - inch (H) | 0.591 |
| Shank height - millimeter (H) | 15 |
| Shank width - inch (B) | 0.61 |
| Shank width - millimeter (B) | 15.5 |
6758153
