Dormer S5264.0 6706790 Finishing End Mill 4.00 mm
- Write a review
$82.85
Basic StandardDORMERCoatingTiSiNCoating property (CTP)1Connection diameter - inch (DCON MS)0.2362Connection diameter - millimeter (DCON MS)6Cut lengthLongCutting diameter - inch (DC)0.1575Cutting diameter - millimeter (DC)4Cutting diameter tolerance class (TCDC)h9Depth of cut maximum - inch (APMX)0.748Depth of cut maximum - millimeter (APMX)19EDP number46706790Flute count (NOF)6Flute helix angle (FHA)50MaterialHMMaterial applicationH - Hardened materialsMID number6706790Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsNeck diameter - inch (DN)0.1457Neck diameter - millimeter (DN)3.7Ordering code ANSIS5264.0Overall length - inch (OAL)2.9528Overall length - millimeter (OAL)75Peripheral effective cutting edge count (ZEFP)6Radial rake angle (GAMF)-26ShankCylindrical shank DIN 6535 HAUsable Length - millimeter (LU)32
Specifications
| Basic Standard | DORMER |
| Coating | TiSiN |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.2362 |
| Connection diameter - millimeter (DCON MS) | 6 |
| Cut length | Long |
| Cutting diameter - inch (DC) | 0.1575 |
| Cutting diameter - millimeter (DC) | 4 |
| Cutting diameter tolerance class (TCDC) | h9 |
| Depth of cut maximum - inch (APMX) | 0.748 |
| Depth of cut maximum - millimeter (APMX) | 19 |
| EDP number | 46706790 |
| Flute count (NOF) | 6 |
| Flute helix angle (FHA) | 50 |
| Material | HM |
| Material application | H - Hardened materials |
| MID number | 6706790 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Neck diameter - inch (DN) | 0.1457 |
| Neck diameter - millimeter (DN) | 3.7 |
| Ordering code ANSI | S5264.0 |
| Overall length - inch (OAL) | 2.9528 |
| Overall length - millimeter (OAL) | 75 |
| Peripheral effective cutting edge count (ZEFP) | 6 |
| Radial rake angle (GAMF) | -26 |
| Shank | Cylindrical shank DIN 6535 HA |
| Usable Length - millimeter (LU) | 32 |
6706790
