Dormer J23510.0-13 6821339 UNC Thread Mill Spiral Flute 10° Oil Feed 1/2 inch x 13
- Write a review
$303.33
Basic StandardDORMERCoatingAlcrona ProCoating property (CTP)1Connection diameter - inch (DCON MS)0.3937Connection diameter - millimeter (DCON MS)10Coolant exit style (CXSC)axial concentric exitCoolant supply property (CSP)1Cutting diameter - inch (DC)0.3937Cutting diameter - millimeter (DC)10Depth of cut maximum - inch (APMX)0.8661Depth of cut maximum - millimeter (APMX)22EDP number46821339Flute count (NOF)4Flute Geometry (FDC)Spiral Flute GeometryFlute helix angle (FHA)10Hand (Cutting direction)RightMaterialHMMID number6821339Ordering code ANSIJ23510.0-13Overall length - inch (OAL)2.8346Overall length - millimeter (OAL)72ShankCylindrical shank DIN 6535 HBThread diameter size (TDZ)1/2Thread form (THFT)UNC - Unified CoarseThreads per inch (TPI)13Usable length (ULDR)2
Specifications
| Basic Standard | DORMER |
| Coating | Alcrona Pro |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 0.3937 |
| Connection diameter - millimeter (DCON MS) | 10 |
| Coolant exit style (CXSC) | axial concentric exit |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.3937 |
| Cutting diameter - millimeter (DC) | 10 |
| Depth of cut maximum - inch (APMX) | 0.8661 |
| Depth of cut maximum - millimeter (APMX) | 22 |
| EDP number | 46821339 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Spiral Flute Geometry |
| Flute helix angle (FHA) | 10 |
| Hand (Cutting direction) | Right |
| Material | HM |
| MID number | 6821339 |
| Ordering code ANSI | J23510.0-13 |
| Overall length - inch (OAL) | 2.8346 |
| Overall length - millimeter (OAL) | 72 |
| Shank | Cylindrical shank DIN 6535 HB |
| Thread diameter size (TDZ) | 1/2 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threads per inch (TPI) | 13 |
| Usable length (ULDR) | 2 |
6821339