Dormer EP213/4 5973810 UNC Machine Tap Spiral Point 4FL 3/4 inch x 10
- Write a review
$123.39
Basic StandardDIN 2184-1Clamping Length - millimeter (LSC)14Clamping width - fractional inch (WSC)11Clamping width - inch0.4331CoatingSteam TemperedConnection diameter - inch (DCON MS)14Coolant supply property (CSP)19.05EDP number138335Flute count (NOF)4Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationP - Steel and cast steelMID number5973810Ordering code ANSIEP213/4Overall length - inch (OAL)4.9213Overall length - millimeter (OAL)125Premachined hole diameter - inch (PHD)0.6496Premachined hole diameter - millimeter (PHD)16.5ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter - inch (TD)0.75Thread diameter - millimeter (TD)19.05Thread diameter size (TDZ)3/4Thread form (THFT)UNC - Unified CoarseThreading length - inch (THL)1.1811Threading length - millimeter (THL)30Threads per inch (TPI)10Tolerance limitH5Usable length (ULDR)2.5
Specifications
| Basic Standard | DIN 2184-1 |
| Clamping Length - millimeter (LSC) | 14 |
| Clamping width - fractional inch (WSC) | 11 |
| Clamping width - inch | 0.4331 |
| Coating | Steam Tempered |
| Connection diameter - inch (DCON MS) | 14 |
| Coolant supply property (CSP) | 19.05 |
| EDP number | 138335 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | P - Steel and cast steel |
| MID number | 5973810 |
| Ordering code ANSI | EP213/4 |
| Overall length - inch (OAL) | 4.9213 |
| Overall length - millimeter (OAL) | 125 |
| Premachined hole diameter - inch (PHD) | 0.6496 |
| Premachined hole diameter - millimeter (PHD) | 16.5 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter - inch (TD) | 0.75 |
| Thread diameter - millimeter (TD) | 19.05 |
| Thread diameter size (TDZ) | 3/4 |
| Thread form (THFT) | UNC - Unified Coarse |
| Threading length - inch (THL) | 1.1811 |
| Threading length - millimeter (THL) | 30 |
| Threads per inch (TPI) | 10 |
| Tolerance limit | H5 |
| Usable length (ULDR) | 2.5 |
5973810
