Dormer E241M4 6305844 Machine Tap Spiral Point Blue Shark 3FL M4 x 0.70 mm
- Write a review
$33.56
Basic StandardDIN 371Clamping Length - millimeter (LSC)6Clamping width - fractional inch (WSC)3.4Clamping width - inch0.1339CoatingSUPER-BCoating property (CTP)1Connection diameter - inch (DCON MS)4.5EDP number46305844Flute count (NOF)3Flute Geometry (FDC)Spiral Point GeometryHand (Cutting direction)RightMaterialHSS-E-PMMaterial applicationM - Stainless steelMID number6305844Ordering code ANSIE241M4Overall length - inch (OAL)2.4803Overall length - millimeter (OAL)63Premachined hole diameter - inch (PHD)0.1299Premachined hole diameter - millimeter (PHD)3.3ShankCylindrical shank with SquareTap chamfer style (TCS)B 3.5 - 5Thread diameter size (TDZ)4Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0276Thread pitch - millimeter (TP)0.7Threading length - inch (THL)0.4724Threading length - millimeter (THL)12Usable length (ULDR)2.5Usable Length - inch (LU)0.8268Usable Length - millimeter (LU)21
Specifications
| Basic Standard | DIN 371 |
| Clamping Length - millimeter (LSC) | 6 |
| Clamping width - fractional inch (WSC) | 3.4 |
| Clamping width - inch | 0.1339 |
| Coating | SUPER-B |
| Coating property (CTP) | 1 |
| Connection diameter - inch (DCON MS) | 4.5 |
| EDP number | 46305844 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Spiral Point Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS-E-PM |
| Material application | M - Stainless steel |
| MID number | 6305844 |
| Ordering code ANSI | E241M4 |
| Overall length - inch (OAL) | 2.4803 |
| Overall length - millimeter (OAL) | 63 |
| Premachined hole diameter - inch (PHD) | 0.1299 |
| Premachined hole diameter - millimeter (PHD) | 3.3 |
| Shank | Cylindrical shank with Square |
| Tap chamfer style (TCS) | B 3.5 - 5 |
| Thread diameter size (TDZ) | 4 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0276 |
| Thread pitch - millimeter (TP) | 0.7 |
| Threading length - inch (THL) | 0.4724 |
| Threading length - millimeter (THL) | 12 |
| Usable length (ULDR) | 2.5 |
| Usable Length - inch (LU) | 0.8268 |
| Usable Length - millimeter (LU) | 21 |
6305844
