Dormer E501M4NO2 5976814 Machine Tap Straight Flute 3FL M4 x 0.70 mm
- Write a review
$24.46
Basic StandardISO 529Clamping Length - millimeter (LSC)6Clamping width - fractional inch (WSC)3.15Clamping width - inch0.124CoatingBrightConnection diameter - inch (DCON MS)0.1575Connection diameter - millimeter (DCON MS)4EDP number95072Flute count (NOF)3Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)LeftMaterialHSSMaterial applicationP - Steel and cast steelMID number5976814Ordering code ANSIE501M4NO2Overall length - inch (OAL)2.0866Overall length - millimeter (OAL)53Premachined hole diameter - inch (PHD)0.1299Premachined hole diameter - millimeter (PHD)3.3ShankCylindrical shank with SquareThread diameter size (TDZ)4Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0276Thread pitch - millimeter (TP)0.7Threading length - inch (THL)0.5512Threading length - millimeter (THL)14Tolerance limitD4Usable length (ULDR)1.5Usable Length - inch (LU)0.5512Usable Length - millimeter (LU)14
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 6 |
| Clamping width - fractional inch (WSC) | 3.15 |
| Clamping width - inch | 0.124 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.1575 |
| Connection diameter - millimeter (DCON MS) | 4 |
| EDP number | 95072 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Left |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5976814 |
| Ordering code ANSI | E501M4NO2 |
| Overall length - inch (OAL) | 2.0866 |
| Overall length - millimeter (OAL) | 53 |
| Premachined hole diameter - inch (PHD) | 0.1299 |
| Premachined hole diameter - millimeter (PHD) | 3.3 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 4 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0276 |
| Thread pitch - millimeter (TP) | 0.7 |
| Threading length - inch (THL) | 0.5512 |
| Threading length - millimeter (THL) | 14 |
| Tolerance limit | D4 |
| Usable length (ULDR) | 1.5 |
| Usable Length - inch (LU) | 0.5512 |
| Usable Length - millimeter (LU) | 14 |
5976814
