Dormer E500M16NO3 5975349 Machine Tap Straight Flute 4FL M16 x 2.00 mm
- Write a review
$52.52
Basic StandardISO 529Clamping Length - millimeter (LSC)13Clamping width - fractional inch (WSC)10Clamping width - inch0.3937CoatingBrightConnection diameter - inch (DCON MS)0.4921Connection diameter - millimeter (DCON MS)12.5EDP number93900Flute count (NOF)4Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationP - Steel and cast steelMID number5976989Ordering code ANSIE500M1.6NO3Overall length - inch (OAL)4.0157Overall length - millimeter (OAL)102Premachined hole diameter - inch (PHD)0.5512Premachined hole diameter - millimeter (PHD)14ShankCylindrical shank with SquareThread diameter size (TDZ)16Thread form (THFT)M - Metric coarseThread pitch - inch (TP)0.0787Thread pitch - millimeter (TP)2Threading length - inch (THL)0.9449Threading length - millimeter (THL)24Usable length (ULDR)1.5
Specifications
| Basic Standard | ISO 529 |
| Clamping Length - millimeter (LSC) | 13 |
| Clamping width - fractional inch (WSC) | 10 |
| Clamping width - inch | 0.3937 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.4921 |
| Connection diameter - millimeter (DCON MS) | 12.5 |
| EDP number | 93900 |
| Flute count (NOF) | 4 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | P - Steel and cast steel |
| MID number | 5976989 |
| Ordering code ANSI | E500M1.6NO3 |
| Overall length - inch (OAL) | 4.0157 |
| Overall length - millimeter (OAL) | 102 |
| Premachined hole diameter - inch (PHD) | 0.5512 |
| Premachined hole diameter - millimeter (PHD) | 14 |
| Shank | Cylindrical shank with Square |
| Thread diameter size (TDZ) | 16 |
| Thread form (THFT) | M - Metric coarse |
| Thread pitch - inch (TP) | 0.0787 |
| Thread pitch - millimeter (TP) | 2 |
| Threading length - inch (THL) | 0.9449 |
| Threading length - millimeter (THL) | 24 |
| Usable length (ULDR) | 1.5 |
5975349
