Dormer E5315/32NO1 5977360 BSW Machine Tap Straight Flute 3FL 5/32 inch x 32
- Write a review
$32.71
Basic StandardISO 529Clamping width - fractional inch (WSC)3.15Clamping width - inch0.124CoatingBrightConnection diameter - inch (DCON MS)0.1575Connection diameter - millimeter (DCON MS)4Coolant supply property (CSP)3.969EDP number155325Flute count (NOF)3Flute Geometry (FDC)Straight Flute GeometryHand (Cutting direction)RightMaterialHSSMaterial applicationN - Non-ferrous metals, P - Steel and cast steelMID number5977360Ordering code ANSIE5315/32NO1Overall length - inch (OAL)2.0866Overall length - millimeter (OAL)53Premachined hole diameter - inch (PHD)0.126Premachined hole diameter - millimeter (PHD)3.2ShankCylindrical shank with SquareThread diameter - inch (TD)0.1563Thread diameter - millimeter (TD)3.969Thread diameter size (TDZ)5/32Thread form (THFT)BSW - British standard WhitworthThreading length - inch (THL)0.5512Threading length - millimeter (THL)14Threads per inch (TPI)32Usable length (ULDR)1.5Usable Length - inch (LU)0.5512Usable Length - millimeter (LU)14
Specifications
| Basic Standard | ISO 529 |
| Clamping width - fractional inch (WSC) | 3.15 |
| Clamping width - inch | 0.124 |
| Coating | Bright |
| Connection diameter - inch (DCON MS) | 0.1575 |
| Connection diameter - millimeter (DCON MS) | 4 |
| Coolant supply property (CSP) | 3.969 |
| EDP number | 155325 |
| Flute count (NOF) | 3 |
| Flute Geometry (FDC) | Straight Flute Geometry |
| Hand (Cutting direction) | Right |
| Material | HSS |
| Material application | N - Non-ferrous metals, P - Steel and cast steel |
| MID number | 5977360 |
| Ordering code ANSI | E5315/32NO1 |
| Overall length - inch (OAL) | 2.0866 |
| Overall length - millimeter (OAL) | 53 |
| Premachined hole diameter - inch (PHD) | 0.126 |
| Premachined hole diameter - millimeter (PHD) | 3.2 |
| Shank | Cylindrical shank with Square |
| Thread diameter - inch (TD) | 0.1563 |
| Thread diameter - millimeter (TD) | 3.969 |
| Thread diameter size (TDZ) | 5/32 |
| Thread form (THFT) | BSW - British standard Whitworth |
| Threading length - inch (THL) | 0.5512 |
| Threading length - millimeter (THL) | 14 |
| Threads per inch (TPI) | 32 |
| Usable length (ULDR) | 1.5 |
| Usable Length - inch (LU) | 0.5512 |
| Usable Length - millimeter (LU) | 14 |
5977360
