- New
Pramet APKT 1604PDR-HM:M5315 6754625 Milling Insert - Square Shoulder
- Write a review
$18.02
Coating0.014Coating process0.008Coating property (CTP)1Cooling effectHMCorner radius - inch (RE)M5315Corner radius - millimeter (RE)MT-CVDCutting edge length - inch (L)0.669Cutting edge length - millimeter (L)17Depth of cut maximum - inch (APMX)0.512Depth of cut maximum - millimeter (APMX)13Feed maximal - millimeter0.35Feed minimal - millimeter0.2Feed_MAX_IMP_NUM0.039Feed_MIN_IMP_NUM1Fixing hole diameter - inch (D1)0.181Fixing hole diameter - millimeter (D1)4.6Insert cutting diameter - millimeter (CDI)5.67Insert diameter - inch (INSD)0.372Insert diameter - millimeter (INSD)9.44Insert shape code (SC)A - parallelogram 85° included angleInsert thickness - inch (S)0.8Insert thickness - millimeter (S)5.67Insert width - inch (W1)0.372Insert width - millimeter (W1)9.44Major cutting edge angle (KRINS)0.031Wiper edge length - inch (BS)Very negative effect on tool life - cooling is not recommended
Specifications
| Coating | 0.014 |
| Coating process | 0.008 |
| Coating property (CTP) | 1 |
| Cooling effect | HM |
| Corner radius - inch (RE) | M5315 |
| Corner radius - millimeter (RE) | MT-CVD |
| Cutting edge length - inch (L) | 0.669 |
| Cutting edge length - millimeter (L) | 17 |
| Depth of cut maximum - inch (APMX) | 0.512 |
| Depth of cut maximum - millimeter (APMX) | 13 |
| Feed maximal - millimeter | 0.35 |
| Feed minimal - millimeter | 0.2 |
| Feed_MAX_IMP_NUM | 0.039 |
| Feed_MIN_IMP_NUM | 1 |
| Fixing hole diameter - inch (D1) | 0.181 |
| Fixing hole diameter - millimeter (D1) | 4.6 |
| Insert cutting diameter - millimeter (CDI) | 5.67 |
| Insert diameter - inch (INSD) | 0.372 |
| Insert diameter - millimeter (INSD) | 9.44 |
| Insert shape code (SC) | A - parallelogram 85° included angle |
| Insert thickness - inch (S) | 0.8 |
| Insert thickness - millimeter (S) | 5.67 |
| Insert width - inch (W1) | 0.372 |
| Insert width - millimeter (W1) | 9.44 |
| Major cutting edge angle (KRINS) | 0.031 |
| Wiper edge length - inch (BS) | Very negative effect on tool life - cooling is not recommended |
6754625
