Dormer S223HB7/16XR.020 7648707 Corner Radius End Mill 7/16 inch
- Write a review
$52.89
Basic StandardDORMERCoatingAlTiNCoating property (CTP)1Connection diameter - fractional inch (DCON MS)7/16Connection diameter - inch (DCON MS)0.4375Connection diameter - millimeter (DCON MS)11.11Corner radius - inch (RE)0.02Cut lengthMediumCutting diameter - fractional inch (DC)7/16Cutting diameter - inch (DC)0.4375Cutting diameter - millimeter (DC)11.11Cutting diameter tolerance class (TCDC)ANSI +.000/-.002Depth of cut maximum - fractional inch (APMX)5/8EDP number7648707Flute count (NOF)4Flute helix unequal1MaterialHMMID number7648707Mill ProfileN - General Purpose Cutter Type for Low to High Resistance MaterialsOrdering code ANSIS223HB7/16XR.020Overall length - fractional inch (OAL)2.1/2Overall length - inch (OAL)2.5Overall length - millimeter (OAL)63.5Radial rake angle (GAMF)8ShankCylindrical shank DIN 6535 HB
Specifications
| Basic Standard | DORMER |
| Coating | AlTiN |
| Coating property (CTP) | 1 |
| Connection diameter - fractional inch (DCON MS) | 7/16 |
| Connection diameter - inch (DCON MS) | 0.4375 |
| Connection diameter - millimeter (DCON MS) | 11.11 |
| Corner radius - inch (RE) | 0.02 |
| Cut length | Medium |
| Cutting diameter - fractional inch (DC) | 7/16 |
| Cutting diameter - inch (DC) | 0.4375 |
| Cutting diameter - millimeter (DC) | 11.11 |
| Cutting diameter tolerance class (TCDC) | ANSI +.000/-.002 |
| Depth of cut maximum - fractional inch (APMX) | 5/8 |
| EDP number | 7648707 |
| Flute count (NOF) | 4 |
| Flute helix unequal | 1 |
| Material | HM |
| MID number | 7648707 |
| Mill Profile | N - General Purpose Cutter Type for Low to High Resistance Materials |
| Ordering code ANSI | S223HB7/16XR.020 |
| Overall length - fractional inch (OAL) | 2.1/2 |
| Overall length - inch (OAL) | 2.5 |
| Overall length - millimeter (OAL) | 63.5 |
| Radial rake angle (GAMF) | 8 |
| Shank | Cylindrical shank DIN 6535 HB |
7648707
