Pramet 803D-18, 5-55, 5-S25 6820796 Indexable Drill 3 x D
- Write a review
$464.76
Adjustment limit maximum - millimeter (ADJLX)0.25Adjustment limit minimum - millimeter (ADJLN)0.35Clamping Type Code (MTP)Screw clamping through holeConnection diameter - inch (DCON MS)0.984Connection diameter - millimeter (DCON MS)25Connection diameter tolerance machine side (TCDCONMS)h6Coolant supply property (CSP)1Cutting diameter - inch (DC)0.728Cutting diameter - millimeter (DC)18.5Cutting edge count (CEDC)1Depth of cut maximum - inch (APMX)2.2047Depth of cut maximum - millimeter (APMX)56Flange diameter - millimeter (DF)35Overall length - inch (OAL)5.768Overall length - millimeter (OAL)146.5Protruding length - inch (LPR)3.563Protruding length - millimeter (LPR)90.5ShankCylindrical Shank ISO 9766Shank length - inch (LS)2.2047Shank length - millimeter (LS)56Usable length (ULDR)3Usable Length - inch (LU)2.4094Usable Length - millimeter (LU)61.2
Specifications
| Adjustment limit maximum - millimeter (ADJLX) | 0.25 |
| Adjustment limit minimum - millimeter (ADJLN) | 0.35 |
| Clamping Type Code (MTP) | Screw clamping through hole |
| Connection diameter - inch (DCON MS) | 0.984 |
| Connection diameter - millimeter (DCON MS) | 25 |
| Connection diameter tolerance machine side (TCDCONMS) | h6 |
| Coolant supply property (CSP) | 1 |
| Cutting diameter - inch (DC) | 0.728 |
| Cutting diameter - millimeter (DC) | 18.5 |
| Cutting edge count (CEDC) | 1 |
| Depth of cut maximum - inch (APMX) | 2.2047 |
| Depth of cut maximum - millimeter (APMX) | 56 |
| Flange diameter - millimeter (DF) | 35 |
| Overall length - inch (OAL) | 5.768 |
| Overall length - millimeter (OAL) | 146.5 |
| Protruding length - inch (LPR) | 3.563 |
| Protruding length - millimeter (LPR) | 90.5 |
| Shank | Cylindrical Shank ISO 9766 |
| Shank length - inch (LS) | 2.2047 |
| Shank length - millimeter (LS) | 56 |
| Usable length (ULDR) | 3 |
| Usable Length - inch (LU) | 2.4094 |
| Usable Length - millimeter (LU) | 61.2 |
6820796
